FREE Mainland UK Delivery On orders over £99
Click & Collect in store
Introducing the Hobbywing QuicRun 16BL30 G2 Waterproof brushless speed control and 2030Sl motor combo.
Intelligent Freewheeling for Lower Heat and Enhanced Performance The ESC features intelligent freewheeling technology, delivering higher drive efficiency, lower operating temperatures, improved stability, and greater reliability.
Compact Size for Easier Installation and Flexible Layout Compared to the previous generation 16BL30 ESC, the G2 ESC is significantly smaller: 8.3% shorter in length, 7.1% narrower, and 16.7% lower in height. This design is compact and makes installation easier and allows for cleaner wiring on the chassis.
BEC Upgrade Compared to the G1 ESC The BEC’s continuous current has been upgraded from 1A to 2A. A peak current of up to 4A The output voltage can be switched between 6V and 7.4V.
Easily powering high-torque and high-voltage servos. This provides faster response and more precise control.
High Protection Rating IP67-rated protection allows it to easily handle harsh environments such as rain, sand, and muddy roads, ensuring reliable performance without environmental limitations.
Note: The IP67 protection rating described above applies under normal usage conditions, providing splash resistance, water resistance, and dust resistance, as tested under controlled laboratory conditions. These protective features are not permanent, and protection performance may degrade over time due to regular wear and aging. Do not submerge the product in water for extended periods, as this may cause damage.
Multiple Programming Methods Supports three programming methods: LCD Program Box Pro, LED Program Box, and SET button, allowing users to conveniently select their preferred programming method for parameter adjustments.
Exceptional Value for Money Specifically designed for entry-level users, with HOBBYWING’s exceptional quality. Easy to operate and beginner-friendly, with no complex setup required.
Perfect Match for QuicRun 2030 G2/2435 G3 Motors The ESC offers excellent compatibility when paired with QuicRun 2030 G2/2435 G3 motors, delivering smoother control.
Wide Compatibility The power system is suitable for both 1/16th & 1/18th scale hobby vehicles.
Type Scale - 1/16th, 1/18th Brushed/Brushless - BL Sensored/Sensorless - SL Waterproof - Yes
Specifications Cont./Peak Current - 30A/100A Input Voltage - 2-3S LiPo BEC Output - 6V/7.4V@2A
Cables and Plugs Power Cord - Black-16AWG-75mm*1,Red-16AWG-75mm*1 Output Line - Black-16AWG-60mm*3 Power Plug - XT60 Output Plug - 3.5MM gold female plug
ESC Programing via SET Button on ESC - Supported LED Program Box - Supported LCD G2 Program Box - Supported OTA Programmer - Not Supported Program Port - Shared with Throttle Wire
Data Recording Extreme value records - Not Supported Real-time Data - Not Supported Historical Data (line graph) - Not Supported
Firmware Firmware Upgrade - Not Supported
Size & Weight Size - 33.4*26.8*15.1mm Weight - 38.5g( Included wires & connectors)
Applications Supported motor types - Sensorless brushless motor, sensored brushless motor (only works in sensorless mode) Applicable models - 1/16th、1/18th On-Road & Off-Road Applicable motor - QUICRUN 2435 G2
Increased Efficiency The maximum efficiency is increased by over 6%
Reduced Temperature Under equivalent load conditions, the maximum temperature can be reduced by approximately 20℃ Compared to EzRun 2030 motor
Supports higher speed limit The motor adopts an integrated magnetic ring structure to strengthen the rotor. It is able to support a higher speed limit of up to 65000RPM. It is increased by 4% when compared to EzRun 2030.
Excellent protection The outlet of the motor is sealed with a silicone rubber sleeve to operate in harsh conditions suchas dust, sand and gravel. Note: It is recommended to block the unused mounting holes of the motor front end cover with screws.
Upgraded materials increased durability -0.2mm thick silicon steel sheet. -High-strength explosion-proof rotor. -High-temperature resistant enameled wire. -High-precision bearings.
Plug-and-play Wire outputThe motor output wires are soldered with 24k gold-plated 3.5mm plugs. The plug-and-play connectivity makes it easy to use and improves the quality of life.
Wide applicability It is widely applicable with three KV values to choose from. It is suitable for all types of 1:18 scale vehicles ranging from on-road to off-road vehicles, short course trucks, trucks, and monster trucks.
Scale - 1/18th Brushed/Brushless - BL Sensored/Sensorless - SL Pole Count - 2
KV Rating - 7800 LiPo Cells - 2-3S No-load Current (A) - 1.3A
O.D.(mm) - 30 Length (mm) - 31 Shaft Diameter (mm) - 2 Weight (g) - 42g Bearing - D8*D3*T4 Connectors - 3.5mm (Male)
For 1/18th vehicles.
Recommended ESC - QUICKRUN WP 16BL30
Choose additional options for this product below.
Please provide the details below so we can review and offer a price match where possible.
* The weblink you supply should be of a valid matching UK product that is currently in stock on a UK retail website.
Hobbywing General LED Program Card for XERUN, EZRUN and QUICRUN
HW38030006 - Hobbywing QR16BL30 G2 and 2030SL 7800KV G2 COMBO
HW30105100 - Hobbywing EZRUN MAX6 G2 ESC
HW30840004 - Hobbywing Capacitors Module - Non Polarity - Stock
HT-MID-043 - HobbyTech X-Mid Rear Suspension Turnbuckle (x2)
HN001-03 - Hobbynox RUBY O-Ring Seal Set
HN22020 - Hobbynox Airbrush Colour - Solid Grey (60ml)
Modelsport, 26 Gay Lane, Otley, Leeds, West Yorkshire, LS21 1BR
© Modelsport 2026 | Privacy Policy | Terms & Conditions | Contact Us
Finance provided by PayPal Credit. Terms and conditions apply. Credit subject to status, UK residents only, Modelsport Ltd acts as a broker and offers finance from a restricted range of finance providers, PayPal Credit and PayPal Pay in 3 are trading names of PayPal UK Ltd, 5 Fleet Place, London, United Kingdom, EC4M 7RD.