FREE Mainland UK Delivery On orders over £99
Click & Collect in store
THE JACKHAMMR HAS LANDED!!!!!!!!!!
You've seen the videos and posts from the M2C TEST TEAM. This truck has not just survived, it's DOMINATED!!!!!!!!!!
Get ready for your new favorite truck!!! The handling and air control are unmatched!!!!
We here at M2C and the Test Team (THANKYOU SO MUCH!!!!!) have worked so hard to bring this idea to reality, and now you can have one too!!
This kit is the upgrade kit to your current truck using all your current (even factory) electronics!!!!!
**** NOTE ***** This kit is not for the faint of heart. This kit is for the experienced RC builder. There's alot of parts, and ALOT of options!*******
You can mount almost any motor / esc combination, in the forward or reverse positions, all with the revolutionary M2C 1472 ESC PLATE !!!!!!
If you already have the M2C forward, or reverse motor mount, you're all set!!! (our motor mounts have 25MM bolt pattern)
MAX MOTOR DIAMETER IS 49MM
If you want to upgrade to a reverse motor mount and dont have ours yet, you can upgrade to the M2C 1466 REVERSE MOTOR MOUNT KIT FOR M2C JACKHAMMR (pieces not needed for JACKHAMMR removed).
WWW.BASHERBODIES.COM HAS THE PERFECT BODY NOW AVAILABLE!!!
There is so much to say about this incredible truck, that I'll let the videos do the talking !!!!
*We recommend that you drill through your stock F/R center chassis braces and secure them with a longer screw and a locknut on top for extra stiffness
*We have found they prefer a bolt with a locknut for the wing mount as opposed to using the extra braces in the rear. (our chassis has the holes if you prefer to use them).
*To use M2C 1467 roll cage mounts, you must lower the cage by cutting off the bottom mounting positions.
*The M2C 1491 SLEDGE REAR CENTER DRIVESHAFT fits front and rear positions. But, because of the increased thickness it will rub your center brace. We recommend using the stock rear center shaft in the FRONT position, and the thicker M2C shaft in the rear.
*VG Racing GT Blue Springs are working well with 80-90wt oils (this is personal preference of course)
*The side guards will need to be modified. While we made it so you could use 2 sets and have a complete guard, the guys prefer for the back to be open to let rocks and debris out.
*The RPM front bumper is an awesome addition to this truck as well.
*You will need your stock motor mount bolts for the M2C 1410 motor support. Or order 9591 screw kit online
Optional parts for arrma battery tray / receiver box / servo mount usage (these can be found in our ARRMA factory parts section).
TRX95096-4-BLUE - Traxxas Sledge Belted 1:8 4WD Brushless Electric Monster Truck - Blue
TRX95096-4-ORNG - Traxxas Sledge Belted 1:8 4WD Brushless Electric Monster Truck - Orange
TRX95096-4-GRN - Traxxas Sledge Belted 1:8 4WD Brushless Electric Monster Truck - Green
TRX95096-4-RED - Traxxas Sledge Belted 1:8 4WD Brushless Electric Monster Truck - Red
Please provide the details below so we can review and offer a price match where possible.
* The weblink you supply should be of a valid matching UK product that is currently in stock on a UK retail website.
M2C1468 - M2C Racing JACKHAMMR Kit for S Series Trucks
M2C11015 - M2C Racing Beefcake Rear Hinge Pin Tie Bar Suspension Blocks for Team Corally
M2C3236 - M2C Racing Arrma Kraton 8S RTR 5mm Rear Shock Shafts
M2C3096 - M2C Racing Arrma 6S V5/ EXB Upper Hinge Pins (AR330658)
M2C9730 - M2C Racing 16mm Replacement O Rings for M2C 1mm O-Ring Shock Pistons
LRP32826 - LRP Nitro Engine ZR.32X Spec 4.1 Competition
Modelsport, 26 Gay Lane, Otley, Leeds, West Yorkshire, LS21 1BR
© Modelsport 2026 | Privacy Policy | Terms & Conditions | Contact Us
Finance provided by PayPal Credit. Terms and conditions apply. Credit subject to status, UK residents only, Modelsport Ltd acts as a broker and offers finance from a restricted range of finance providers, PayPal Credit and PayPal Pay in 3 are trading names of PayPal UK Ltd, 5 Fleet Place, London, United Kingdom, EC4M 7RD.