The MT3608 2A Max DC-DC Step Up Power Module Booster Power Module is a low-cost module that can step-up a 2 to 24V input voltage up to a 5 to 28V output at up to 2A.
DC-DC boost converters step up the input voltage to a higher voltage while also stepping down the available current since the module can’t output more power than its inputs.
This boost converter is adjustable and capable of outputting a voltage in the range of 5.0 to 28V at a continuous current of up to 1.5A depending on input/output voltage settings with 1A available with most settings.
Since it is a boost converter, the input voltage must be lower than the output voltage.
The device is able to use low ESR bulk ceramic capacitors rather than electrolytic caps which avoids long-term aging concerns and contributes to the compact packaging.
The MT3608 converter IC has over-current and thermal limiting features built-in to safely shut the device down if driven too hard.
The module has a single-turn potentiometer for adjustment of the output voltage.
Turning the pot CW decreases the output voltage while turning it CCW increases the output voltage.
The upper limit of the adjustment range will depend on the input voltage and the load. With a 9V input for instance, at 1A, the upper voltage limit will be approximately 20V.
These are compact boards with 4 solder pads for making connections.
1Piece MT3608 2A Max DC-DC Step Up Power Module Booster.
No Guarantee No Warranty
There are no reviews yet.
Center Shaft Geared motors specifically designed for robotic applications offer a wide variety of options. Key features – easy to
DHT11 is a Humidity and Temperature Sensor, which generates calibrated digital output. DHT11 can be interface with any microcontroller like
The DPDT Rocker Momentary Switch is generally used to make the Clockwise as well as the anti-clockwise motion of the motor,
The LilyPad 328 ATmega328P Main Board 16M is an Arduino-program micro-controller design to be easily integrated into e-textiles and wearable
The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position
The NRF24L01 module is the latest in RF modules. This module uses the 2.4GHz transceiver from Nordic Semiconductor, the NRF24L01+.
This is Robotics Switch Box Enclosure With DPDT Switches. The switch box is used to accommodate two DPDT Rocker Switches. It
Transparent Acrylic Glossy Case Enclosure Box For Arduino Uno R3 is of high-grade acrylic, which provides excellent protection. This is unique