₹ 250.00 (Incl. Tax)
PAM8610 Mini 10+10W Stereo Audio Power Amplifier Board Module Volume Control Knob
10W class-D stereo audio amplifier,10W(left channel)+10W(right) output power into an 8Ω speaker load and 12V power supply Offers low THD+N, high-quality sound reproduction, high efficiency: 90% Operate on any voltage from 7.5V to 15V, conveniently powered with a 9V or 12V power supply or battery High efficiency but low cost achieved by CMOS class D amplifier design For DIY design, requiring a miniature audio amplifier, portable and mobile applications operating on battery power
– 10W class-D stereo audio amplifier,10W(left channel)+10W(right) output power into an 8Ω speaker load and 12V power supply – Offers low THD+N, high-quality sound reproduction, high efficiency: 90% – Operate on any voltage from 7.5V to 15V, conveniently powered with a 9V or 12V power supply or battery – High efficiency but low cost achieved by CMOS class D amplifier design – For DIY design, requiring a miniature audio amplifier, portable and mobile applications operating on battery power
– Size: Approx. 40 ×40 ×22 mm/ 1.57 ×1.57 ×0.87 inch, including volume control knob – Volume control potentiometer shaft diameter: Approx. 6mm/ 0.24 inch – Output power: 10W+10W, 8Ω – Frequency response: 20Hz to 50KHz – Amplifier class: D – Operating voltage: 7.5 – 15V DC – Recommended supply voltage: 12V, the connector center PIN is + – Quiescent Current: 20mA – Speaker Load: 4-8 Ohms, 8Ω recommended, screw terminal connectors – Noise canceling circuit built into the amplifier board – Screw terminals for easy speaker connection – no soldering needed – No popping noise when Power on/ off – Power switch and mute switch connectors and volume control potentiometer – Short-circuit current protection: under-voltage lockout and over-temperature protection (shuts down at an internal temperature of 140C±15C)
No Guarantee No Warranty
Actual product may vary from the product photograph displayed above. Photograph just for reference.
There are no reviews yet.
DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal
DS3231 Real Time Clock-RTC-Module
L298N 2A Based Motor Driver is a high power motor driver perfect for driving DC Motors and Stepper Motors (Now find
The MPU-6050 3-Axis Accelerometer and Gyro Sensor module use MPU-6050 which is a little piece of motion processing tech!!! There
This is a very easy to use low cost semiconductor Gas sensor Module with analog and digital output. This module
This is RFID Reader/Writer RC522 SPI S50 CARD AND KEYCHAIN which works on non-contact 13.56mhz communication, is designed by NXP as
Sound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino is a Single channel signal output Sensor. The output is