1-Wire data protocol, implemented in many Teltonika devices, can be used to read RFID tags (by emulating them using iButton protocols).
1-Wire RFID readers are a convenient way to implement driver authorization and other functionalities.
Note! This chapter describes the installation of an accessory supplied by Teltonika. Accessories from other manufacturers may require different steps. To connect the accessory to your system:
Because this RFID reader emulates the received RFID values as iButton values, in configuration software it has identical functionality as the iButton reader.
The reader works as soon as it is connected, but the iButton isn't used anywhere other than displayed in the iButton I/O element. In order to use it for the Immobilizer scenario, the device must have the scenario enabled. Then, iButton check can be enabled to only accept iButtons specified in the iButton list under the 1-Wire tab.
This short guide explains how to convert the iButton value in "I/O" menu to an ID usable in the iButton list in "1-Wire" menu.
Note! For FMx6 trackers, you do not need to convert these values.
Excel algorithm (copy-paste to a sheet):